Web Settings - TCP/IP and Port

Select the Web Settings - TCP/IP and Port option from the Web Options menu to set the IP address and port number for FacilitatePro. When upgrading FacilitatePro the IP Address may be set to "All"; reset this by selecting the correct IP address from the pull-down menu. The pull-down menu will contain all IP addresses detected on the server computer. FacilitatePro will typically be set to run on Port 80; change the TCP Port entry if required.

Web Settings - TCP/IP and Port

NOTE: Only adjust settings described in the section when necessary. Do not make change to other settings. Making other adjustments may cause the application to perform unexceptedly.

Web Settings - TCP/IP and Port
TCP Port	Sets the Port number that FacilitatePro will listen on. Defaults to Port 80. Common alternative for Web traffic is Port 8080. Adjustments to the Port number will also adjust the URL for the server to, for example, http://team.facilitate.com:8080.
IP Address	Select the IP address for FacilitatePro. The list of IP addresses detected on this server is shown in the pull-down menu. Select "All" only if you want FacilitatePro to listen on more than one IP address.
Allow SSL for Web Server	Check this box to activate SSL encryption. A third party encryption key is also required. Visit the Facilitate.com User Forum web site or contact technical support for detailed instructions for SSL implementations.
HTTPS Port Number	Define Port Number for SSL encrypted traffic. This is usually 443.
Default HTML Root	Directory within Facilitate.com product folder that is the root directory for all web traffic. This should be set to WEB.
Default Home Page	Home page for Web hits to FacilitatePro server. This file lies within the Default HTML Root directory and is usually named Index.shtml. An extension of .shtml is required for server-side commands within the web page to function. Unless altered, this page is the Web logon screen for FacilitatePro. Backup and customize this page as required.